Neema3D Athena PLA 3D Printer Filament 1.75mm Iron Grey 1kgCode: 13176560
Νήμα PLA, διαμέτρου 1.75mm για 3D εκτυπωτές.
Similar products
Specifications
- Material
- PLA
- Colour
- Gray
- Diameter
- 1.75 mm
- Weight
- 1 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
Reviews
Reviews photos
Reviews by our members
- This review is about the colour: Red
My review is about the ATHENA Wine Red. Initially, I don't see how this color is characterized as "wine red" while it is clearly BROWN. Furthermore, this is the most peculiar PLA filament that has passed through my hands. The recommended temperatures it provides are 35-60 bed and 195-215 nozzle. At temperatures below the maximum, the filament does not stick to the bed and the print fails (fortunately at least early on). At temperatures above the maximum, it starts well but along the way the layers bend and the print fails again. I managed to print a figure with this filament and it was very difficult. It is not the filament that you will leave to print on its own at home and find it ready when you return from work. I will definitely not choose this series again.
Translated from Greek ·Did you find this review helpful? - This review is about colour: Multicolour, weight: 3 kg
I bought the package with the 3 colors: orange, gray, and blue PLA. The first two print perfectly, but with the blue one, I couldn't manage to print anything. It constantly clogs the nozzle, and I have to do a cold pull.
Translated from Greek ·Did you find this review helpful? - This review is about the colour: Orange
The material is okay (I bought the orange one). It looks okay (it's quite glossy) and prints okay (approximately). The prints stopped because the filament was a little tangled from the store.
With a little force, it untangled properly, but my extruder (ender 3 neo stock) wasn't strong enough for when it encountered such "knots".
I untangled it and reloaded it by hand to a certain point, and it prints normally.Translated from Greek ·Did you find this review helpful? - This review is about the colour: Black
Quite good and economical filament.
I print at around 200° with a bed temperature of 60° (you can go a little lower here)Translated from Greek ·Did you find this review helpful? - This review is about colour: Multicolour, weight: 3 kg
It's great, impeccable material... I have bought it several times and will buy it again.... I usually get both the Black and the White and make nice color combinations in my creations....
Translated from Greek ·Did you find this review helpful? - This review is about the colour: White
I am writing the comment in case I can help. With the Ender 5 Pro that I have and after 5 failed attempts, I finally achieved satisfactory adhesion with 220 degrees on the Nozzle and 60 on the Bed. I will update on the print quality at the end with photos.
Translated from Greek ·Did you find this review helpful? Το προϊόν το έχω σχεδον 2 εβδομάδες και έχω εκτυπώσει σχεδόν το μισό καρουλι σε εκτυπωτή Prusa I3 MK2. Είμαι πάρα πολύ ευχαριστημένος. Πολύ καλη εκτύπωση, λεπτομερής και σχεδον καθόλου stringing. Θερμοκρασίες : 206/61. Θα αγοράσω κι άλλο σίγουρα.
Did you find this review helpful?- This review is about the colour: White
Perfect? No.
It is certain that if you switch to this from another thread, you will encounter issues. However, they can be resolved.
Indeed, you will see that it does not stick to the bed, but with a new leveling and possibly increased bed temperatures, it will stick just fine.
Indeed, I also experienced the thread getting tangled and printing air (to the point where the extruder would cut the thread because it was rubbing against the same spot). I don't know what the problem is, I experienced it twice and it hasn't happened again.
I will buy it again as it has an attractive price and things go wrong until you learn it.Translated from Greek ·Did you find this review helpful? - This review is about the colour: Red
I use at least 1-2 spools of white and black per month and I have also used yellow, red, and blue Athena PLA. I haven't had any issues, the prints are very satisfactory. Temperatures 205/60.
Translated from Greek ·Did you find this review helpful? - This review is about the colour: White
Being very satisfied with the black version, I tried the white one. I was disappointed. While I can print with various other filaments without any problem, with this one:
- I need to print at 250 to avoid clogging from retractions
- At any temperature, I cannot achieve consistent extrusion
- The prints are functional, meaning the dimensions come out with calibration, and due to the high temperature, the bonding is strong, but the appearance is poor.I provide a comparison with the black one, which prints predictably at 220.
3D printer: Labists ET4
Translated from Greek ·Did you find this review helpful? - This review is about the colour: White
Bought a while ago, untouched, of course I didn't take it out of the packaging, without any problem in using it.. Prints quite well, requires different settings than the corresponding black one though.
Translated from Greek ·Did you find this review helpful? - This review is about colour: Multicolour, weight: 3 kg
I have used the white color thread so far and here are the results with standard quality. Flawless, without any snags, and very soft to the touch. I highly recommend it for this price
Translated from Greek ·Did you find this review helpful? - This review is about the colour: Black
Cheap, good quality but the thread got tangled in the middle of the necklace, resulting in half of the item coming off, which took a long time to fix. You get what you pay for.
Translated from Greek ·Did you find this review helpful? - This review is about the colour: Orange
Very good thread!! It sticks perfectly to the bed and has good flow. After 2 years of use, I can say that it is one of the best, if not the best, that I have tried.
I had some threads that I had opened earlier in the beginning and even now I print flawlessly without any problems!!Translated from Greek ·Did you find this review helpful? - This review is about colour: Multicolour, weight: 3 kg
Very good product, economical and high quality!! I have been using the Athena series for 2 years without any problems. With proper bed leveling, it does not detach from the bed. I highly recommend it!
Translated from Greek ·Did you find this review helpful? - This review is about the colour: Black
It requires a lot of work with settings to achieve satisfactory results. I have wrapping in almost all prints and with small models, I get a nice spaghetti.
Translated from Greek ·Did you find this review helpful? - This review is about colour: Multicolour, weight: 3 kg
Very good product! No issues since last November that I've been using it until today! As for whether it detaches...do proper bed leveling and no filament detaches at all.
Translated from Greek ·Did you find this review helpful? (Γκρι) Δεν μου έκανε καθόλου stringing στους 208 βαθμούς. Αξιόπιστο και καλά πλεγμένο. Το τελικό αποτέλεσμα είναι πάρα πολύ καλό και αρκετά smooth.
Did you find this review helpful?- This review is about the colour: Black
When I want to do a small print, it exhausts me, one time it doesn't stick to the bed, the other time it warps.. While with other Chinese ones I had no problem. For prints that do not contain any point smaller than half a centimeter at the beginning of the print, it is relatively good. (200°/60°) I will not buy it again.
Translated from Greek ·Did you find this review helpful? - This review is about colour: Multicolour, weight: 3 kg
Excellent products.
Translated from Greek ·Did you find this review helpful? - This review is about the colour: Black
For its price, it is a very good filament. I have used it on an Ender 3 Pro with 200/60 and the results were of very good quality without any issues in printing. I recommend it for anyone who wants a good filament at an affordable price.
Translated from Greek ·Did you find this review helpful? - This review is about the colour: Black
Reliable and very easy to use for printing. 200°, 60° bed. I had it exposed for twenty days in a room with terrible humidity and it maintained its quality even until the last gram. I bought another 7 kilograms in various colors from the Athena series, as well as from the Evo series (excellent series). I definitely recommend it.
Translated from Greek ·Did you find this review helpful? - This review is about the colour: Black
Almost perfect.
Finally, the neema was not to blame for the issues with the sticking, I commented for nothing. Once I made two adjustments to the printer (Anycubic i3 Mega Pro), it prints almost perfectly at 190/55 (although I set it to 192/56 out of exaggeration) and sticks "badly" to the bed.Since I see that some people have a problem with the colored ones, I note that I only worked with the black one.
Translated from Greek ·Did you find this review helpful? - This review is about colour: Multicolour, weight: 3 kg
Very poor quality filament, it detaches or never sticks, the filament is tangled on the spools and you lose prints. It's one kilo and I threw it away.
Translated from Greek ·Did you find this review helpful? Από τα καλύτερα filament που έχω χρησιμοποίηση! Το έχω κάτι εβδομάδες και δεν έχει παρουσιάσει κανένα πρόβλημα και το αποτέλεσμα είναι παρά πολύ καλό.
Did you find this review helpful?- This review is about the colour: Black
One of the best filaments I have used! I have had it for a few weeks and it has not presented any problems and the result is very good.
Translated from Greek ·Did you find this review helpful? - This review is about the colour: White
New to this hobby.
First, I bought the white filament, the corresponding black one, and also the blue one.I am very satisfied, I haven't encountered any issues.
(bed 60'C, extruder 200'C)
Translated from Greek ·Did you find this review helpful? - This review is about the colour: White
I have been working with the material for weeks now and I have had very good results at a very good price. 190 C head and 55 C base.
Translated from Greek ·Did you find this review helpful?
Questions
Do you have a question about the product?
132 users have this product and can help you
Ask for the product
Be the first to leave a comment!