• MotionCam is a wired motion detector with photo verification support.
• It is installed indoors. 
• Detects motion at a distance of up to 12 meters. 
• Ignores pets when installed and configured correctly. 
• The detector is available in two versions: with and without photo support (upon request).  
• Wired communication has a range of up to 2,000 meters.
• Compatible only with Hub2 or Hub2 Plus.

When installed and configured correctly, the MotionCam does not react to animals up to 50 cm in height and up to 20 kg in weight.

The detector should be installed at 2.4 meters without obstructing its view. For example, in a corner where the view will not be obstructed by a wardrobe or other furniture that a pet might climb on.

It is also important to set the correct sensitivity in the detector settings:

• High — the detector does not react to cats (up to 25 cm in height).
• Medium — does not react to small dogs (up to 35 cm in height).
• Low — does not react to animals up to 50 cm in height.

When indoor motion detectors are installed below the recommended height, animals move into the hypersensitivity zone. The detector may trigger an alarm. The detector will also notify if the animal can jump to the level of the MotionProtect Plus or move close to it.

• Special Lens:  Fresnel lenses are designed so that the infrared radiation patterns of a human, an animal, and thermal noise appear differently. The MotionCam Jeweler lens provides the detector with accurate information about the thermal object in the detection zone and the nature of its movement.
• The installation of the MotionCam Jeweler at the correct point and height ensures an informative thermal diagram and significantly improves detection accuracy. Professional installation also makes the operation more effective for pets.
• Filter for thermal interference. The detector immediately analyzes the thermal diagram:  the intensity of infrared radiation, the size of the thermal spot, the speed of movement, the time spent in the detection zone and other parameters, developing SmartDetect. The software algorithm accurately responds to a human and does not bother the user with false alarms.

• Detection angle: 88.5° horizontal / 80° vertical
• Recommended installation height: 2.4m
• Pet option: Weight up to 20kg - height up to 50cm
• Camera field of view: 90 degrees
• Visual alarm verification: 9sec photo transmission time / resolution 640x480px
• Tamper protection
• Wireless transmission power: 20 mW
• Communication protocols: Jeweller (868.0-868.6 MHz), Wings
• Maximum distance between detector and central unit (HUB): Up to 1,700 m (in open area)
• Power supply: CR123A battery
• Power supply voltage: 3 V
• Battery life: Up to 4 years
• Operating temperature range: From 0°C to +40°C
• Enclosure protection: IP50
• Operating humidity: Up to 75%
• Dimensions: 135x70x60 mm
• Weight: 167g