Prity S3 W17 Metallic Radiator Wood Burning Stove 19kW Beige
Wood Stoves

Prity S3 W17 Metallic Radiator Wood Burning Stove 19kW BeigeCode: 2487265

Key features:

  • Total Power: 19kW
  • Suitable for spaces up to 110 sqm
  • Wood storage space
  • Dimensions: 93 x 57 x 53 cm
See full description
The product is not available for shipping outside of Greece.

How Skroutz is there for you after your purchase?

After-sales Support

If there is a technical issue with your purchase, get in touch directly with Skroutz! We can assist you with everything and find the best solution for you, without any hassle.

See more

Free Returns

If you change your mind or if it's not the size you wanted, you can return your purchase easily, fast & completely free of charge!

See more

What is the green button?

Play the video

from 557,60 €

Description

  • Efficiency : 17+5 Kw (17 on the radiators & 5 on the heater)
  • Maximum coverage : 550m3
  • Connects to a domestic radiator network of up to 8 radiators for uniform heating either independently or in parallel.
  • Construction material : 5mm steel
  • Thermal insulation material : Firebrick
  • Fuel : Wood, briquettes
  • Bolt diameter : 13 cm
  • Temperature of exhaust gases at outlet 318'C
  • Weight : 118 Kg
  • Dimensions (HxWxD) : 93 x 57 x 53 cm
  • Door dimensions (H x W) : 20 x 30 cm
  • Hearth dimensions (W x W) : 36 x 36 cm
  • Air flow regulator
  • Flue gas control regulator
  • Ash collection drawer
  • Water chamber : 23 lt
  • Fire-resistant glass with ventilation to keep it always clean

Features

  • Wood stove with boiler for connection to home radiator circuit
  • Suitable for spaces: 110m² (or 330m³)
  • Thermal Power (boiler + stove): 17+5=22kW
  • Nominal boiler power: 12kW
  • Efficiency: 87%
  • Construction Material: Steel (5mm in the combustion chamber & 2.5mm around)
  • Insulating Material: Firebricks
  • Fuels: Wood, briquettes
  • Air supply regulator
  • Exhaust gas control regulator
  • Ash collection drawer
  • Fireproof glass with ventilation to stay always clean
  • Water tank capacity: 23lt
  • Maximum water temperature: 90°C
  • Maximum operating pressure of the water circuit: 1bar
  • Factory test operating pressure: 1.8bar
  • Water connection diameter: ∅ 1"
  • Exhaust gas temperature: 130°C
  • Exhaust gas emission rate: 15gr/sec
  • Ash content: 42.7mg/m³
  • CO concentration in exhaust gases: 1,425mg/m³
  • CO emissions: 0.114%
  • Exhaust gas pressure (min): 12+/-2 Pa
  • Flue diameter: ∅13cm
  • Door dimensions: 30 x 19.5cm
  • Combustion chamber dimensions (HxWxD): 43 x 42.5 x 27.8cm
  • Dimensions (HxWxD): 93 x 57 x 53cm
  • Weight: 118kg
  • For connection to the radiator, additional equipment is required which is not included in the package (circulator, supply collector, return collector, open expansion tank, constant temperature valve, safety valve, check valve, venting tank, optionally you can also use a three-way valve)

Manufacturer

Prity

Specifications

Product Details

Air Ηeater
No
Radiator
Yes
Cook Stove (with Oven)
No
Chimney diameter
130 mm
Material
Metallic
Colour
Beige
Wood Heating Stove
No

Performance

Energy Class
A
Total Power
19 kW
Power in Air
5 kW
Power in Water
14 kW
Energy Efficiency
75.5 %
Water Consumption
8.389 kg/h

Dimensions & Weight

Height
930 mm
Width
570 mm
Depth
530 mm
Weight
118 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews

  • John_Felek
    5
    10 out of 10 members found this review helpful

    I had it from 2012 until 2018 in my house. I am thinking of putting it back. I bought it back then for 120€. With -18 degrees outside, I had 26 degrees inside the house. It was 100 square meters. The way things turned out, I'm thinking of putting it back. The wood is tiring, but it can't be helped. It also provided hot water and I had permanently hot water. The best investment even if you're renting.

    Translated from Greek ·
    • Heating performance
    • Draft
    • Combustion space size
    • Construction quality
    • Value for money
    • Wood consumption
    Did you find this review helpful?
  • Nikolaos_Doukakis
    5
    12 out of 12 members found this review helpful

    Verified purchase

    It is amazing for the money it costs.
    I installed it with expansion to 150 and it works very well.
    77 square meter old house. 4-5 tons of wood but also 25C temperature.
    I connected it myself to the old oil radiators.
    It cost me about 950 euros with circulation expansion tank, etc.

    Translated from Greek ·
    • Heating performance
    • Draft
    • Combustion space size
    • Construction quality
    • Wood consumption
    • Value for money
    Did you find this review helpful?
  • dialechti14
    5
    8 out of 9 members found this review helpful

    Perfect.
    It's worth every penny and more... It heats up to 26 degrees Celsius throughout the house...
    Hot water in the boiler...
    I received it in 2 days...
    Everything is good, I recommend it to anyone who wants to install a stove to warm up...

    Translated from Greek ·
    • Heating performance
    • Draft
    • Combustion space size
    • Construction quality
    • Wood consumption
    • Value for money
    Did you find this review helpful?
  • 5
    14 out of 15 members found this review helpful

    Home oven (83 L) !!! I have it since last year (2013).

    Translated from Greek ·
    Did you find this review helpful?
    • Heating performance
    • Draft
    • Construction quality
    • Value for money
    • Combustion space size
    • Wood consumption
  • Verified purchase

    • Draft
    • Value for money
    • Combustion space size
    • Construction quality
    • Wood consumption
    • Heating performance

Questions

14 users have this product and can help you

Ask for the product
Bil1964/2/5

Έχω ήδη στα δωμάτια παλιά βαριά σώματα καλοριφέρ. Μπορεί να συνδεθεί σ αυτά, ή πρέπει να τα αντικαταστήσω με άλλου τύπου;

Manolis_Peratsakis

Απαγορεύεται να δουλέψει χωρίς να είναι συνδεδεμένη με το νερό..θα σπάσει

slaskaridis

πως συνδεεται στο υπαρχον καλοριφερ πετρελαιου; τι πρεπει να αλλαξει στον κεντρικο λεβητα; αυτονια κλπ;

Manolis_Peratsakis

Είναι πολύ εύκολη η σύνδεση αλλά μόνο για επαγγελματία υδραυλικό... απευθύνθητε σε κάποιον επαγγελματία διότι υπάρχει περίπτωση να καταστρέψετε το προϊόν

See all questions (5)