Do you want your light to turn on automatically when you go to the hallway? Just smartly set the scene to activate your home into action.
Sold by
Stock 2 pieces
Skroutz Buyers Protection & 2 years warranty
Set the delivery location to see products according to your choice.
Sold by
Stock 2 pieces
Skroutz Buyers Protection & 2 years warranty
Intermediate Switches
Household Sensors & Alarms
Household Sensors & Alarms
Intermediate Switches
Smart Hubs
Household Sensors & Alarms
Misc Home Security Hardware
Household Sensors & Alarms
Household Sensors & Alarms
Household Sensors & Alarms
Household Sensors & Alarms
Household Sensors & Alarms
Household Sensors & Alarms
Household Sensors & Alarms
Household Sensors & Alarms
Household Sensors & Alarms
Household Sensors & Alarms
Prices are calculated for:Κύπρος, Other Payment Options
Do you want your light to turn on automatically when you go to the hallway? Just smartly set the scene to activate your home into action.
Connect a camera to the motion sensor and place it almost anywhere in the house, then you can see what is happening in your home through the camera on the sensor page of the APP.
It can provide a detection distance of up to 6M and an angle of up to 110° when the sensor is operating, ensuring that suspicious movement near your home is detected even earlier.
You will receive a low battery notification when the battery life is at 10%.
Simply use the 3M adhesive tapes to place the motion sensor in your ideal locations in seconds.
There are two ways to activate the SNZB-03.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
I have a total of 5, no problem with any of the 5. Excellent for their price and for the purpose I bought them (to turn on the lights). They do not work for an alarm because they take time to reset and detect motion again.
The battery drains very quickly and the app does not provide accurate information about its level. Frequent disconnections that turn off the sensor and then to reconnect it, the pairing process had to be repeated several times. It is better to choose a more reliable solution.
I have 4 of them and as long as they work, they are ok BUT they go offline on their own without any other device connected to the sonoff zigbee hub having an issue. Sometimes they get stuck on detecting motion for hours when there is none. You have to reset them to get them back and re-register them in the routines. I do not recommend them.
They were purchased for automation through home assistant. They were connected to a ZigBee tuya hub, with which the sensor never sent motion cleared, resulting in it not being usable. Later, I read many reports on the internet from users with similar problems. Before throwing it away, I decided to try the native integration of home assistant by purchasing a sonoff USB dongle p (plus). It connected immediately and has been working perfectly since then! If you are indeed experiencing issues with this specific sensor, it may be a problem with the ZigBee hub.
I have 5 of them that work with smartthings without any problem.
The only drawback is that you cannot set a reset time.
With the instructions provided by user roa below, the device works perfectly. I have connected it to Home Assistant through SONOFF ZIGBEE BRIDGE. Perhaps the disconnections are due to the channel of your WiFi. Try changing the channel
Described in one word: 'Garbage'. Stay away. I bought two, over 1+ month ago. They are the worst devices I have ever used. They do not have the range they claim in any case whatsoever. Even in the same room, without obstacles, outdoors (without other networks), both devices are out of network most of the day, at a distance of 1-2 meters from the zigbee coordinator. Out of the 34 zigbee devices, these are the only devices that behave like this. The 'you get what you pay for' principle would indeed apply here if zigbee devices were not already excessively overpriced compared to competing technologies.
You get what you pay for. Excellent product for its price. I have it as a sensor to turn on the lights in the room, and it's okay. From the moment it detects motion, it takes 2 minutes to send another motion detection. So if something passes in front of it, you will receive a notification, but if something passes again within the next 2 minutes, you won't receive one.
Give some extra money to get something more reliable. Constant disconnections, freezes on motion detected, battery runs out quickly. If you're going to deal with the basics for so long, find something else and use your time more creatively. (I've bought 3, all dysfunctional)
For indoor use, it is very good, it has excellent connectivity with Alexa. And you can create routines - scenarios through the ewelink app or Alexa. The connection with Google was not as good
At least 2 out of the 3 give false alarms, now I will try the third one, but I already know the result.
Also, I have the large PIRs from Sonoff, one indoor and one outdoor, they do not give false alarms (fortunately).
I don't know why some people have complaints. I installed it above the external door with a routine through Alexa when it gets dark and detects motion, it turns on a floor lamp in the hallway for 1 minute so I can enter the house. Everything I have bought from SONOFF and I have bought many things, all work flawlessly.
It is not worth it for outdoor use, every now and then it makes a lot of noise and scares away all the birds, while there are some sparrows on the balcony. Only at night it is a bit quiet haha because it doesn't have bats. It is exactly the same as the other one which is not pet-friendly and both of them make noise at the same time from something in the outdoor area.
Not very reliable with the Sonoff Zigbee Bridge. However, by changing the firmware to Tasmota (zigbee bridge), no problem
It is good for running simple routines with Alexa in a smart home. Not suitable for security sensors for alarm systems. After detecting motion, it goes into sleep mode for 1-2 minutes. It experiences some disconnections.
It does not work properly, it takes false motion commands and drains the battery quickly!!! I do not recommend it, I have already bought 4 and they all have the same problems
I will not say that I am thrilled by its sensitivity!
It is well constructed and easily connectable through the Sonoff application.
It connects instantly with Amazon Alexa
Verified purchase
VERY short battery life (2 weeks) in a place with daily movement inside the house (kitchen).
Verified purchase
They work very well, I didn't have any issue
Verified purchase
Very good, but within 2 months it ran out of battery!
Verified purchase
Good for the money it costs!!
It loses connection when I change between the two that I bought
Verified purchase
It constantly sticks and the battery runs out quickly
Verified purchase
If it doesn't catch movement for a few days, it disconnects on its own.
570 users have this product and can help you
Ask for the productκαλησπέρα, θέλω να ρωτήσω από το app της ewelink σου δίνει την επιλογή σε πόση ώρα ο αισθητηρας να ξανά " σκαναρει" τον χώρο;
δηλ μετά από 3 δευτερόλεπτα ή 10;
Μετα απο 1 λεπτο και κατι
Έχω μία απορία και θα ήθελα να ρωτήσω αν Μπορούσε να με βοηθήσει κάποιος. Έχω το Zigbee motion sensor και Έχω δημιουργήσει μία ρουτίνα μέσω της εφαρμογής Amazon Alexa Για να ελέγχουν τις λάμπες, Εδώ να σημειώσω ότι οι αισθητήρες όταν πιάνουν κίνηση Δουλεύουν κανονικά Για την κάθε Λάμπα που τους αρμόζει αλλά δεν μπορώ να βρω σε καμία περίπτωση πώς μπορώ να βάλω ένα χρονοδιακόπτη ωστε όταν δεν πιάνει κίνηση Ο αισθητήρας για παράδειγμα στο ένα λεπτό να σβήνει αυτόματα η λάμπα Εδώ, αν μπορείς να με βοηθήσετε σε αυτό ??
Όταν ο αισθητήρας δεν ανιχνεύσει κίνηση για 1 λεπτό, τότε στέλνει σήμα "no motion detected".
Οπότε με μία ρουτίνα μπορείς να σβήσεις τα φώτα αυτόματα.
Δυστυχώς δεν έχω δουλέψει με Alexa, οπότε δεν μπορώ να βοηθήσω περισσότερο.
Με τη δική του εφαρμογή, (όχι home assistant) μπορεί να κρατάει το φως ανοιχτό όσο κάποιος είναι στο δωμάτιο και κινείται κάπου κάπου, και να το σβήνει αφού αδειάσει το δωμάτιο;
Δεν είναι θέμα αισθητήρα αυτό που ζητάτε. Αυτό είναι μια ρουτίνα μέσω alexa που της ζητάς π.χ όσο ανιχνεύει κίνηση ο αισθητήρας σαλονιού λέμε τώρα υποθετικά δεν θα μπαίνει σε off η smart λάμπα του σαλονιού. Οταν δεν θα ανιχνεύει κίνηση θα δίνει εντολή για off. Κατ αρχην έχετε ασχοληθεί με smart home ? Γιατί π.χ για να δουλέψει αυτός ο αισθητήρας πρέπει να υπάρχει HUB sonoff ZigBee.
Be the first to leave a comment!