Sold by
Stock 5+ pieces
Skroutz Buyers Protection
Set the delivery location to see products according to your choice.
Sold by
Stock 5+ pieces
Skroutz Buyers Protection
Wearable Straps
Wearable Straps
Wearable Cases
Wearable Cases
Smartwatches
Wearable Straps
Mobile Phone Screen Protectors
Wearable Screen Protectors
Wearable Screen Protectors
Wearable Screen Protectors
Wearable Screen Protectors
Wearable Screen Protectors
Wearable Screen Protectors
Wearable Screen Protectors
Wearable Screen Protectors
Wearable Screen Protectors
Wearable Screen Protectors
Prices are calculated for:Κύπρος, Other Payment Options
I easily installed it on my iwatch 7 by watching the relevant video. It is basically a gelatin that fit perfectly and on top of it, I applied the spigen protective cover for the rest of the watch. Unfortunately, the next day, it got marked from a sharp object that hit it :( and I had to replace it. However, the screen underneath remained intact!
It has been applied to the Apple Watch 7 45mm, but I think it is for the 44mm or it is poorly constructed, resulting in the finger getting stuck at the edges. For me, it was a bad purchase. It was removed within a month because it affected the clarity and caused the finger to get stuck at the edges due to not covering the entire screen
Very good protection. Especially in my case, using a case, it does not bother and is not bothered at all. It protects from bumps and scratches, however, whoever wants it to be smooth as if it has no protection needs to change it every three months or so, because it is soft as a material and some bumps remain embossed. The result is that you need a package (it contains three protectors) approximately every year. The only way for me with not so high cost.
Those who didn't give good reviews probably didn't watch any installation videos before. Excellent fit on Apple Watch 9. Yes, it's not glass but a gelatin, it doesn't affect the colors or touch at all.
I would like to clarify that it is a film and not a glass protector. I bought it knowing this. In my opinion, it is better because glass protectors do not fit properly due to the curvature of the screen (or they do not fully cover it due to the curvature, meaning they stop at the flat part of the screen). Ideal for avoiding scratches but not strong impacts.
Very good, I will buy it again when it wears out. It requires a little attention during installation. I first put on the case and then applied it more easily
It was installed on Apple Watch 9 45mm. Easy installation, the only negative is that it leaves a little gap around. It has been combined with the Spigen slim fit case. So, 4 stars for the gap, in the future I will come back to write about durability!
Perfect in application with a nice touch feel. It doesn't seem like you have put anything on. For installation, you spray the screen enough with the liquid it has and it goes in very easily.
It is difficult to impossible to place this thing correctly without rings. If you don't have a case, it starts to come off within 3 days. I don't understand why there is no glass
This one has been installed on a watch series 9 45mm & has a perfect fit even on the edges!!
1) Attention, it is not glass but a film.
2) For proper application: After cleaning, wet the watch and the film, and then apply the film on the watch. Because there is liquid and we may not place the film correctly, we can slide it to the desired position. Once it is in the right place, remove the liquid with the provided spatula.
The worst product I have ever bought, literally a waste of money.
It definitely is not "Bubble-free" as the description says. It is impossible to remove the film without leaving fingerprints on the side that sticks to the screen. Because it is soft and flexible, it is difficult to apply it straight and if you apply it incorrectly and try to remove it, it becomes useless. No matter how careful I was, the job couldn't be done and in the end, I threw all 3 of them away.
As for protection and usefulness, I can't even tell because I didn't even get that far
First, you should clean the watch well from dust, then spray it with enough liquid provided in the box. Next, spray your fingers, especially your thumbs and index fingers, with enough liquid. Finally, after spraying the watch and fingers, spray the plastic cover with enough liquid so that you can move it when you touch it on the watch. If you can't, spray again between the watch and the plastic cover. Press with the sponge while holding the plastic cover from the opposite side and repeat from the opposite side... Now when you put it on, you will have an annoying feeling as you move your finger up, down, left, and right to access the various settings of the watch because that's where the plastic cover ends. Today is the first day of application, and we will see its durability in the future... The white spots visible in the photos are dust outside the plastic cover... If you clean it, it looks like it's not wearing anything
The worst product from Spigen that I have purchased. It is a film (not glass), which means it is very flexible and cannot be properly applied. It is also almost impossible to remove without smudging it with fingerprints, even slightly. Even with guide stickers that I applied on the top part to help with the application, it ended up with about ten bubbles (which do not go away like on a glass if you rub them, they just scratch and distort the film in those specific areas). I ruined all three that came in the package without even getting close to a decent result! Stay away from this product!
The worst for Apple Watch protection. It applies very difficultly. Durability 0. Quality below zero. Better to get the membrane you wrap food with.
Very good protection without distorting the image and hindering the use in all areas of the watch - you don't even realize there is protection.
For the application, you first need to watch the relevant video and it applies easily without leaving gaps
I threw away the first screen protector because it was difficult to apply and it had bubbles when I put it on... The second one had bubbles too, but they were gone the next morning! So it worked fine with the Spigen case. I hope it protects the watch :)
While it doesn't compromise the resolution and seems to provide protection, it is applied excessively difficultly.. I had to throw away one of the three films.. I will get a glass protector next time
In comparison to other solutions, it's just fine! There is a slight distortion in the response, but too small to create sadness and disappointments.
Unacceptable!
I broke two gelatin packs just trying to open them on Tuesday. I didn't even attempt to put the third one in
It does not cover the entire screen, resulting in finding the finger on the swipe up/down. It breaks after a few weeks of use
I think it is by far the worst Spigen product! However, the biggest problem I had was removing the film from the adhesive tab it was stuck to! As for how much this spray helps the film stick, I don't know, but I do know that if you look closely at the watch, it leaves marks as if you pressed on the film. Unfortunately, I bought it out of necessity because I bought the Spigen Rugged Armor Pro strap and no glass protector fits, and in closing, I must say that I tried very hard and applied it very well, but unfortunately, 3 days later, I see that it is bulging in the corners.
good gelatin neither bothers nor shows but it is too expensive at 8 euros ... it comes with 3 gelatins but they don't last long, they need to be changed every 1-2 months
Easy installation and nice feel. Personally, I don't believe it changes the screen feel that much. It doesn't withstand impacts because it's a membrane, but it's perfect for the job it needs to do. It also pairs well with Spigen cases and everything is good.
edit 23/1
I'm still on the first one and it hasn't had any issues. It hasn't come off or anything, and it's like the first day
The screen protectors are a joke, and all three of them came off in less than a month. They started peeling off from the edges and eventually came off completely.
Very thin protective film. It is not glass. It was scratched on Sunday afternoon after being applied on Saturday evening. Not durable at all. I would not recommend it. It is better to spend a little more and get glass.
Very good, but it doesn't have great durability. After a short period of use, it will need to be replaced. That's probably why the packaging includes 3 inside.
The same gelatin for the Apple Watch 44mm fits perfectly. On the 7 model with the 45mm, it easily comes off at the edges.
Quite a good application, but in case the watch hits somewhere, the protection can easily get scratched. Also, it is thin and does not definitely protect from strong impacts that would prevent the screen from breaking, but it is very useful for everyday life, not good for protection from simple little hits and scratches.
I have been using it for several years on all of my Apple Watches (even from Apple Watch 4) and it has never disappointed me. An excellent product from a company synonymous with quality.
Like every screen protector, it takes away the perfect sense of touch with the screen. However, it applies well without compromising the resolution. It is applied with a special method and special liquid from the company that is included in the package. It is a good screen protector but expensive.
It sits well on the edges of the screen, it just requires a little attention during installation or a more experienced hand. It forgives some mistakes if you clean and reapply the screen protector with the liquid that comes in the package. It is a soft film that does not generally affect the experience. Be careful with some cases as they will definitely "kick" the screen protector.
1275 users have this product and can help you
Ask for the product
Be the first to leave a comment!