Midea MHA-V12W/D2RN8-B Three-Phase Heat Pump 12.1kW 60°C SplitCode: 34015931
The heat pump MHA-V12W/D2RN8-B from the company Midea, has a power of 12.1 kW and can cover the needs of a house up to 121 m². It is a device that has the ability to extract existing energy from an external space and transfer it to an internal one, providing heating and cooling. In order to heat the space, the heat pump extracts heat from the environment...
See full description
- Rated Thermal Power (7ºC - 35ºC): 12.1kW
- Maximum Water Temperature: 60°C
- Heating Type: Air to Water
- System Type: Split
- Cooling
How Skroutz is there for you after your purchase?
After-sales Support
If there is a technical issue with your purchase, get in touch directly with Skroutz! We can assist you with everything and find the best solution for you, without any hassle.
See moreFree Returns
If you change your mind or if it's not the size you wanted, you can return your purchase easily, fast & completely free of charge!
See more![](/assets/schwartz/trust-video-thumbnail.png)
What is the green button?
Play the videoAll shops
Prices are calculated for:Κύπρος, Other Payment Options
- 5.099,00 €
- 5.120,00 €
- 5.120,00 €
- 5.110,00 €
- 5.100,00 €
- 5.098,99 €
Description
The heat pump MHA-V12W/D2RN8-B from the company Midea, has a power of 12.1 kW and can cover the needs of a house up to 121 m². It is a device that has the ability to extract existing energy from an external space and transfer it to an internal one, providing heating and cooling. In order to heat the space, the heat pump extracts heat from the environment and transfers it to the interior of the house in order to increase the temperature of the indoor space. On the contrary, in order to cool the space, it extracts heat from the interior of the house and releases it into the environment, gradually cooling the space.
It requires connection to a three-phase power supply, as high loads are required for its use, and it consumes a small percentage of electrical energy from the grid, extracting the remaining energy from the environment. This results in energy and cost savings, as there is no longer a need to purchase oil or wood. The use of electrical energy is only required during the heat pumping stage, not during its transportation. The ratio of energy required for the pump's operation corresponds to approximately 3/4 from the environment and 1/4 from the electrical current. This means, for example, that for every 3 kWh extracted from the environment, in combination with 1 kWh of electrical energy required for its operation, we have a total of 4 kWh of useful thermal energy.
The technology used is air-water, using air as a heat source and water as a medium of transportation. It heats or cools the water, which is then distributed inside the house.
The system is split, meaning it consists of two independent units, the indoor unit (containing the circulator, heat exchanger, etc.) and the outdoor unit (housing the compressor, exchanger, fan, etc.), which are connected to each other with copper pipes. This allows for customization in separate spaces (e.g. creating different zones according to the requirements of each space). Additionally, there is no risk of the unit freezing, as there is an independent exchanger inside the building.
It is considered medium temperature, as the water temperature of the system can reach up to 60 degrees Celsius, and it can be combined and equally efficient with both underfloor heating and fan coils.
The pump can optionally accept a tank to produce hot water for domestic use throughout the year. The tank is not included and must be purchased separately.
Finally, in any case, the proposal for the most suitable heat pump based on the needs is made by an experienced engineer. After studying, they will recommend the appropriate pump that will provide the maximum efficiency with the lowest annual operating cost. If you choose a heat pump with higher power than what the building needs, besides the higher initial cost for its purchase, it forces it into continuous restarts, resulting in pump wear and increased operating costs.
- Rated Thermal Power (7ºC - 35ºC): 12.1kW
- Maximum Water Temperature: 60°C
- Heating Type: Air to Water
- System Type: Split
- Cooling
Specifications
Technical Specifications
- Rated Thermal Power (7ºC - 35ºC)
- 12.1 kW
- Maximum Water Temperature
- 60 °C
- Heating Type
- Air to Water
- System Type
- Split
- Cooling
- Yes
- Domestic Hot Water
- Optional Domestic Water Supply
- Power Source
- Three-Phase
- Environmentally Friendly Refrigerant (R32)
- Yes
Energy Class
- Energy Class (35ºC)
- A
- Energy Class (55ºC)
- A
- COP (7ºC - 35ºC)
- 4.95
- EER (7ºC - 35ºC)
- 2.75
- Indoor Unit Noise Level
- 64 dB
- Outdoor Unit Noise Level
- 64 dB
Outdoor Dimensions
- Length
- 1118 mm
- Height
- 865 mm
- Depth
- 523 mm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
Questions
Do you have a question about the product?
Those users who have this product can help you
Ask for the product