Wood stove TGM-023Α from manufacturer Thermogatz, high energy class "A+". It is an easy and economical solution to heat your home or cottage. Its installation is simple and low cost, as is its maintenance. You can even use wood briquettes.
It consists of the combustion chamber, the ash collection container at the bottom, and the chimney. It is placed in any space at a certain distance from the wall, in order to properly install the chimney. As a general rule, the better the space is ventilated, the more efficient and safe the stove will be.

It is made of cast iron, which means it takes a little longer to heat up compared to a steel one. However, it has the advantage of retaining and radiating heat for a longer period of time after the fire is extinguished, keeping the room warm. Cast iron is considered the most suitable material for heating devices due to its good thermal conductivity and high heat resistance.
It is suitable for heating a space approximately from 61 to 80sqm.

Its performance level (77%) is the percentage of the fuel that is converted into useful heat. As the performance level increases, the stove becomes better, as heat losses are reduced.

Instructions for proper use of the wood stove:

- Use dry wood, at least 2 years old
- Initially, place a small amount of wood and gradually increase it.
- Clean the surfaces if the wood stove is frozen.
- Clean the glass when it is cold.
- Dry (up to 20% humidity) and dense (olive, oak, fir, beech) woods are much more efficient in burning.

Features & Dimensions

• Total Power: 15kW
• Water Consumption: 6.4935064935064934kg/h
• Chimney diameter: 150mm
• Height: 750mm
• Width: 720mm
• Depth: 420mm
• Weight: 115kg