Reviews by our members

• 5

  2 out of 2 members found this review helpful

  zackper

  2024-05-07

  Verified purchase

  It took me a lot of testing to find the right settings, but the final product is worth it! I already bought extra packages.

  I printed on an Ender 3 Pro and I would recommend:
  45-50mm/s printing speed, 210-220 nozzle temperature. Definitely use a nozzle with a diameter of 0.5mm or larger, ideally hardened steel. The print will definitely have stringing, but it cleans up very easily.

  Translated from Greek · Show original

  • 
  • 
  • 
  • 
  Did you find this review helpful?YesNo

  Report
• 5

  Atairiastosss

  2024-04-06

  Verified purchase

  Nice material, I tested it in trials/calibrations and ended up with 210/60 bed and I have nice quality and full speed in the 3D printer. I will buy again.

  Translated from Greek · Show original

  • 
  Did you find this review helpful?YesNo

  Report
• 3

  TINMAN

  2024-03-25

  Difficult to use (I have previously used a wood filament from another brand without any issues). I don't know if it's the composition or the printer (ender 3v2) that's causing the problem, but I definitely won't be purchasing it again.

  Translated from Greek · Show original
  Did you find this review helpful?YesNo

  Report
• 5

  1 out of 1 members found this review helpful

  Cyrile

  2024-01-25

  Verified purchase

  The result is excellent. As for handling, it should not be exposed to moisture, you can put a brim around the piece to prevent it from detaching. If you don't have a dry box and it produces strings, print a retraction tower in the end to see at which temperature you should print. I am satisfied anyway. I will buy it again when it runs out.

  Translated from Greek · Show original
  Did you find this review helpful?YesNo

  Report
• 5

  4 out of 4 members found this review helpful

  Saddam

  2024-01-24

  Verified purchase

  I understand why there is complaining. It smells and produces threads. I believe that it needs a lower speed and temperature in order to not produce threads. My first print did not turn out well, but the other two came out fine. It is not for 220°C, better at 195°C and 150mm/sec for me with Sonic Pad. (without Sonic Pad, if the printer is good, up to 100mm/sec and increase the retraction, which is how much the filament should be pulled back before changing layers). Some inconvenience BUT the result is indeed wood. And that is what matters.

  Translated from Greek · Show original

  • 
  • 
  • 
  Did you find this review helpful?YesNo

  Report
• 5

  4 out of 4 members found this review helpful

  Dimitris Katsolis

  2024-01-22

  Verified purchase

  Wonderful filament! I had no issues printing it at a temperature of 220-230 degrees on a PEI bed surface. It adheres well to other materials like PETG, as shown in the photo.
  Just keep in mind that it has a strong smell when printing, due to the wood content.
  Lastly, it would be good to finish the print with a simple PLA to clean the nozzle from any residue of this filament, to prevent clogging.

  Translated from Greek · Show original

  • 
  • 
  Did you find this review helpful?YesNo

  Report
• 1

  0 out of 6 members found this review helpful

  GEORGIOS Τ

  2023-09-21

  Verified purchase

  It has a big problem with the temperatures it works with, as the coil detaches before it finishes what you want to print. Or it just stops working in general, it has a big issue. I will not prefer it again. This doesn't happen with the other colors, I don't know because it has advertised wood as a beautiful material, but it is difficult to use

  Translated from Greek · Show original

  • 
  • 
  • 
  • 
  • 
  Did you find this review helpful?YesNo

  Report
• 5

  Chris_Arapis8493

  2024-06-03

  Verified purchase

  easy to print...

  Translated from Greek · Show original
  Did you find this review helpful?YesNo

  Report
• 5

  vas_m9

  2024-07-13

  Verified purchase

• 4

  Aris_Kalomenides

  2024-05-28

  Verified purchase