Partition by the company Karag, for installation in a shower. The installation of the partition is done from wall to wall, so you will be able to fully define the space of your shower. It is a more economical solution compared to a cabin and is ideal for bathrooms that do not have space restrictions.

It can be installed either on the shower or directly on the bathroom floor.

It features 2 doors that open by sliding, making the cabin particularly convenient in limited spaces, as no additional external space is required to open. The entrance opening is 61.4 cm.

The closing is magnetic, thus contributing to the greatest possible sealing.

The door movement is achieved with double rollers for perfect sliding while the quick release mechanism offers you easy cleaning.

The profile is made of aluminum, which offers resistance to moisture and corrosion, while at the same time it is very easy to clean.

The partition features tempered glass, which is the ideal choice as it is a very safe material with high durability while providing a high aesthetic result.

Although it has excellent durability, in the event of accidental breakage, it will shatter into small pieces, ensuring that no injury will occur. In contrast, if regular glass is used, it will break into large sharp pieces, which are dangerous and can cause serious injuries.

The thickness is 6 mm.

The finish is transparent, which offers a more beautiful result in your bathroom while allowing natural light to pass through the cabin. It is much easier to clean, as its smooth surfaces retain fewer salts, and over time you will not encounter difficulties.

Special application on the inner side of the cabin for protection against limescale. Reduces cleaning time by up to 90% as the surface remains clean for a long period and prevents the accumulation of mold and bacteria, thus ensuring excellent hygiene conditions.

An important advantage is that cleaning it is easier compared to a cabin.

After each use, it is advisable to leave the door open for a while to allow ventilation and prevent mold formation.

Measure from one side of the shower stall to the other, from one wall to the other.

Then measure the height, from the base of the shower (where the partition will sit) to the point you want it to reach. In any case, there should be an opening at the top to allow steam to escape. Ideally, there should be at least a 15 cm distance from the ceiling.

Note: You can measure the distance from one side to the other at 3 points, to account for the possibility of a crooked wall.